MSD Starter Saver
  "http://www.sdpc2000.com/UserFiles/Image/msd8984.jpg" alt="">

When you install a crank trigger system, having locked out timing
may put a strain on the starter and flywheel. This compact
controller provides a retard that automatically retards the timing
during cranking to ease the pressure. The MSD Starter Saver
measures only 1.5"x 3.5" x 2" and wires into your ignition system
with only four wires. It can be programmed to retard the timing
10° or 20° during cranking only. The retard is activated
when the engine begins cranking and is deactivated once the engine
reaches over 800 rpm. (If the engine rpm drops below 500 rpm it
will activate again.) The Starter Saver receives the trigger signal
through an MSD Crank Trigger pickup or the Distributor’s magnetic
pickup. This Control has a very accurate pickup compensation
circuit resulting in rock steady timing throughout the entire rpm
range of your engine. There is also an LED that illuminates with
each trigger signal to confirm operation and the circuitry is
completely potted in a polyurethane compound for extreme vibration
resistance. NOTE: The Starter Saver can only be used on V8
applications using an MSD Distributor or Crank Trigger.



Note: Not legal for sale or use on pollution controlled
vehicles.


     
Part #
Manufacturer
Product Name
Price
MSD8984
MSD Ignition
Starter Saver with Signal Stabilizer for MSD Ignition or Crank Trigger Systems
$94.99